Tailplane Control Horn
2 hours
Sounds fun, this is large 'open' U shaped piece of metal that will acts as a control attachment peice for the tailplane. quite simple to make and the largest single sheet peice made to date. I finished this off including the final sanding with 400 grit wet'n'dry finish ready for a coat of zinc chromate primer. Before I prime it I will need to add two 30 degree bends to the control arms. Once this is done I can paint it and then coat it in a two part enamel.
Sounds fun, this is large 'open' U shaped piece of metal that will acts as a control attachment peice for the tailplane. quite simple to make and the largest single sheet peice made to date. I finished this off including the final sanding with 400 grit wet'n'dry finish ready for a coat of zinc chromate primer. Before I prime it I will need to add two 30 degree bends to the control arms. Once this is done I can paint it and then coat it in a two part enamel.
posted by Andy at
11:21 pm
0 Comments:
Post a Comment
<< Home